Home > Industry news
Don't use the wrong method of use to "murder" your PCB Unloader Machine
The plate-down machine is a wisdom crystal derived from human production. It is a good helper to help people save manpower. Then I often see a lot of operating methods that do not use the plate-down machine. I sweated for the plate-down machine. Isn't it "murder" it? Using the wrong operation method to operate the lower board machine will shorten its life span. Then how do we properly use the lower board machine? The following describes the correct use of the lower board machine by Chuangwei:
Before starting
Check whether the air source is on and check whether the air pressure is normal. At the same time, check whether there is any foreign matter on the track and whether the machine is clean.
Make sure that no plate stays between the upper line and the lower line and the transfer table before turning on the power.
Before use, also confirm whether the power of the machine is turned on and whether the emergency button is restored.
after the end
After finishing work every day, please clean the periphery of the equipment on the board.
After you finish the work every day, when leaving the equipment, please turn off the power supply and main control valve according to the correct method.
Regular maintenance and confirming whether or not the stop action is normal. However, at this time, it is necessary to place other people's inaccessible signage notices in a clear position, telling the device that it is currently very stopped or the automatic safety device is being tested. However, the person required for preservation, adjustment, and permission is not subject to this restriction.
If you want to use a durable machine, it is necessary to check and clean it regularly. Of course, the quality of the machine is also indispensable. In order to control the quality of each machine, each machine is strictly controlled. Each machine is a good one. Welcome to purchase from Chuangwei.
Bunny
Amy