Home > Cleaning Machine

  • Cleaner-Cleaning Efficiency SMT Cleaning Equipment Fixture Cleaning,CW-5100
Cleaner-Cleaning Efficiency SMT Cleaning Equipment Fixture Cleaning,CW-5100

Cleaner-Cleaning Efficiency SMT Cleaning Equipment Fixture Cleaning,CW-5100

  • Product description: Cleaner-Cleaning Efficiency SMT Cleaning Equipment Fixture Cleaning,CW-5100
  • INQUIRY

Machine and Artificial / Ultrasonic Cleaning Fixture Comparison:

Condenser cleaning

Manual or ultrasonic cleaning

Comparing results

 Automatic cleaning,100% safe

 Charged cleaning or artificial iron brush cleaning+solution,poor safety

 Batch cleaning,fast and efficient

 Cleaning time is long,low efficiency

 One-touch operation,no need to special cleaning staff

 Iron brush fixture,dirty,tired,need special cleaning personal

 Up and down,around the full range of cleaning,cleaning thoroughly,high cleanliness

 Condenser on the dead ends,the surface dirty cleaning difficult

 Solution cycle repeated repeated use

High Cleaning costs

Spay cleaning and rinsing,governance well intact

Iron brush cleaning will be raised,the surface off the phenomenon,the impact of follow-up product quality

Cleaning +rinse+dry,after cleaning the surface without solvent

No rinse,after cleaning solvent residue,after the use of heat when the smell out after the smell out

Specifications of CW-5100 Fixture Cleaning Machine with Spray Rotary Cleaning:

• Cleaning basket size :Φ1000mm× 200mm(H) , Maximum cleaning height :450mm, Special size should be customized

• Cleaning fluid capacity :80L( maximum )

• Rinse fluid capacity :80L( maximum )

• Cleaning method : Spray Rotary Cleaning

• Dry way : Compressed air dry

• Recommended cleaning time :3-15mins

• Recommended cleaning and drying time :2-3mins

• Recommended rinse time :1-2mins

• Recommended drying time :3-6mins

• Cleaning filter : Using 3-level filtration

• Class 1 filter 2mm( Filter debris )

• Level 2 filter :100um( Primary filter flux, iron and other lumps )

• Level 3 filter 20um( Filter flux, rosin and so on )

• Air supply :0.5~ 0.7Mpa

• Air consumption :800-1000L/min

• Outlet size :Φ130mm(W)×60mm(H)

• dimension :1550mm(L) ×1780mm(W) ×1730mm(H)

CW-5100 Advantages of Cleaning the Rule:

1. One-touch operation,no need to special cleaning staff

2. Batch cleaing,cleaning fast and efficient

3. No electricity ,all pneumatic cleaning,100% safe

4. Up and down, around the full range of cleaning,cleaning thoroughly,high cleanliness

5. Suitable for a variety of cleaing fluid

6. Automatic cleaning,saving labor

7. The solution is repeated several times

8. Spray cleaning,governance with a condenser intact

Sample for Fixture Cleaning :